K2’s 3D Pager LCD Alarm System
K2’s 3D Pager LCD alarm system is the very first car alarm or remote starter in 3D graphics. This 1 ½ inch display screen approximately has 65,000 colors in 3D animation. With an OLED (Organic Light Emitting Diode), the owner will experience an immediate full motion video response time and viewing angles. The remote is lightweight and comes with great durability and efficient power. It can operate on broad temperature ranges.
The 3D Pager LCD Alarm System by K2 has special features that will give the owner a high level of comfort and ease of use. The touch sensor does not have a key entry. The owner only needs to input his/her own 4–8 digit PIN pass code to be able to unlock the doors without the need of a remote control or key. When the numbers put in are wrong, the system only allows five failures within a span of 30 minutes or else the feature will not work for the next 24 hours. The system is also armed with a light touch sensor that responds to weak electric currents emitted by the finger.
There is a pull-down menu for the display. This provides the owner easy navigation to the features and systems. The remote Features, System Setting, and Watch are easy to operate with this pull-down menu. The menus can also be displayed in fun animated icons that provide a better distinction among the features and settings of the system.
The 3D Pager LCD Alarm System’s display panel can also be customized using the owner’s own picture. The owner has only to send the image in JPEG format to the nearest dealer who will install it into the system. The picture will be saved and displayed on the screen when the button II is pressed.
The remote control has sensors that will activate to shocks, door opening, and trunk and hood opening. Once the alarms are triggered, the sirens will howl. The parking lights will flash and the red warning LED will blink rapidly.
The rest of 3D Pager Alarm System’s features include a 3-button remote control, a turbo timer, three auxiliary outputs, a LED indicator with two colors, and optional sensor output. It can even check the cabin’s temperature and has a built-in parking system. It can operate up to a distance of 1.5 kilometers.
K2’s 3D pager alarm system is run by a rechargeable 3.7V lithium polymer battery.
Viper 5901 Responder LC3: LCD Remote
Responder LC3 is the third generation of Viper’s Responder series. It has a combination of Responder’s best features with the advances in New Technology Platform, which was introduced with Responder LE, the winner of Best of Innovations Award.
Some of the New Technology Platform features include a DSD Serial Data Port. This provides a plug-and-play connection from installers to XPRESSKIT interfaces. A tachometer wire connection is also not required with the Virtual Tach. Additional relays are also almost entirely eliminated with the Flex Relays Onboard for Remote Start and Light Flash.
The Responder LC3 system comes with a 2-way LC3 SST remote accompanied by a 1-way remote that enables activation within a one mile range.
Responder LC3 has simple icons with vivid text labels on a large LCD screen. These icons are prioritized for easy usage. It has a Priority™ User Interface which controls 24 functions on two different cars with only five buttons. The important icons will also appear three times larger than the rest of the icons. This feature is called the Priority Icon Map™, which will put the large important icons in the center of the screen and the unused ones on the edges. With these features, the owner will have easy access to commands monitoring his/her vehicle, making Viper 5901 Responder LC3 the finest LCD remote on a one mile range.
The default display of the remote’s start mode is the time. However, once the owner selects the Active Temp Check, Responder LC3 can display the temperature in Fahrenheit or Celsius. In this way, the owner can know the temperature outside the vehicle even before leaving the car. The owner can also activate the Runtime Reset to extend the runtime and warm the interior of his/her car. The Responder LC3 will alert the owner three minutes before time runs out. The alert can be chosen among an audible tone, a vibration, a flash reminder on the LCD screen, or all of them at the same time.
With a siren, the Responder LC3 will immediately notify the owner within range if something happens to his/her vehicle. If the owner is not within range, the LC3 will display on its screen what has happened once the owner unlocks the door. The owner can also put the car’s siren into silent mode and the LC3 will only display what happens on the screen with the Silent Mode2 siren less arming.
Viper 5901 Responder LC3 has a lithium-ion rechargeable battery onboard. It is also equipped with a mini-USB recharging.
Viper 791XV: Car Alarm System
Viper remote start 791XV is a 2-way security and remote start system from Viper. The commands are easily understandable with the Viper security system. It has an interactive display that features icons and text. The security system also alerts to triggers through beep or vibration. Most of all, a simple push of a button will immediately start the vehicle even when it is one-quarter of a mile away.
Its two-way communication system can reach the best range with the combination of high frequencies and Binary Data communication. The Viper 791XV security and remote car system can function at 434 MHz. It is designed exclusively for automatic transmission vehicles that are fuel-injected.
The Viper 791XV features a remote start system with six channels and responder technology. The system is computer-based with a transceiver LCD screen where commands and triggers can be confirmed. This feature enables any transmitter button to be assigned in any system function. The owner can also set the button’s configuration to suit his specific needs with the installer.
It has a security arming equipped in multi-levels to allow the owner to select the sensor he wants to activate. The owner can also choose which sensors to bypass once the Viper security system is activated.
The Viper remote car starter has an LED status indicator. This blue indicator displays the status of the vehicle’s interior after arming the vehicle. The LED will flash every second so that the owner will know that his vehicle is being protected by the system. Viper 791XV also features the Dome Light Supervision, which enables the dome light after ignition, door closure, or security disarm for 30 seconds.
Viper 791XV’s security system can even be equipped while the vehicle is on the move and will disable once you turn off the ignition. This disarming feature can hush the system but without disabling it. The arm or disarm chirps can also be temporarily turned off with the use of the Viper remote car starter’s Silent Mode option.
The security car alarm also has a variety of safety features that ensure the proper motor operation and prevention of engines and its components from damage due to accidents. The anti-grind circuitry feature prevents the starter motor from damage. When the key is on the start position, it stalls the starter motor from engaging.
The vehicle’s engine speed is also monitored by the Viper remote starter. If the RPMs differ from the programmed levels, it shuts off the engines automatically and prevents damage to the motors.
The Viper security alarm with remote starter is powered by 1.5V AAA batteries. There is a battery level indicator that flashes when there is already a low charge level and requires replacement. It also has a Power Saver mode that automatically activates when there is no activity performed while armed.
